Gai-tronics ICS Page/Party Desktop Subset Manuel d'utilisateur télécharger pdf (Page 2)

Pub. 42004-429B

ICS Page/Party

Desktop Subset Page 2 of 4

e:\standard ioms - current release\42004 instr. manuals\42004-429b.doc

11/13

Installation

WARNING

Do not install this equipment in hazardous areas. Such installations may

cause a safety hazard and consequent injury or property damage.

Figure 2. ICS Multi-Party Desktop (wall-mount) Subset Outline

OTE: The desktop subset can be placed on a desk or can be wall mounted. When mounting the desktop

subset to a wall, first remove the four screws from the bottom of the housing. Rotate the bottom section

of the housing 180º and reassemble the top and bottom with the four screws. This will allow the subset to

be attached to a vertical surface. To allow the handset to remain on hook when wall mounted, pull out the

handset hook and rotate 180º.

1. Place the subset at the desired location and plug in the interconnect cable. Route the opposite end of

the cable to the remote amplifier location.

2. Plug the interconnect cable into the remote amplifier.

1 2 3 4 5

Pas de commentaire

Gai-tronics ICS Page/Party Desktop Subset Manuel d'utilisateur Page 2