Gai-tronics ICP9000 Navigator Series Console Operator's M Manuel d'utilisateur télécharger pdf (Page 22)

Navigator Configuration ICP9000 Navigator Series Console Operator’s Manual

12/10 22

Setup - Control Setup

The Control Display is divided into 32 frames. Each frame contains setup functions for an individual

control button. The control caption box allows up to 13 characters for alias labeling. Choosing the

Momentary button causes the output to be turned on until the control button is released. The

PushOn/PushOff choice latches the button in either the On or the Off position. The Timeout selection

causes the output to turn off when the time expires. The timeout can be programmed from one to 100

seconds. Use the box in the upper right hand corner to program the communication port for the I/O

control. When all parameters are configured, press the

SAVE button to save current configurations or

press the

EXIT button to save and close the form.

OTE: If Timeout is selected, the button acts as a push on/off. When the timeout expires the output is

turned off.

If selected, the Disable choice prevents the control button from being displayed on the screen (default

setting). Any selection other than Disable allows the Control button to be displayed.

Figure 10.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 69 70

Pas de commentaire

Gai-tronics ICP9000 Navigator Series Console Operator's M Manuel d'utilisateur Page 22