Gai-tronics DEX-101 Hazardous Area Driller's Intercom Sta Manuel d'utilisateur télécharger pdf (Page 7)

Pub. 42004-679L2G

ODEL DEX-10X AND DEX-20X DRILLER’S INTERCOM STATIONS Page 6 of 13

f:\standard ioms - current release\42004 instr. manuals\42004-679l2g.doc

07/13

Field Wire Installation

Remove the termination enclosure cover and pull all wiring into the termination enclosure. Make all

connections as described below.

OTE: All field wiring is to be completed in the termination enclosure (bottom enclosure) only.

Figure 4. DC Model Installation Diagram (See note below.)

Figure 5. AC Model Installation Diagram (See note below.)

OTE: Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1),

and local codes for the specific requirements regarding your installation. Install all equipment without

modification and according to the local and national codes. Install conduit and seals where required.

Class 2 circuit wiring must be performed in accordance with NEC 725.55.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Gai-tronics DEX-101 Hazardous Area Driller's Intercom Sta Manuel d'utilisateur Page 7