Gai-tronics ICS Hazardous Area Page/Party Stations Manuel d'utilisateur Page 30

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 34
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 29
Pub. 42004-723L2G
ICS Hazardous Area Page/Party
®
Station Page 28 of 31
f:\standard ioms - current release\42004 instr. manuals\42004-723l2g.doc
11/14
Table 3. Troubleshooting SmartSeries Configurations
Problem Potential Cause
Speaker volume is
too low/loud.
Refer to the ADVANCE System Programming manual, Pub. 42004-700L2,
for station configuration.
Refer to the “ALS Minimum Level”, “ALS Offset Level”, and “SmartSeries
VLC Level” sections.
Check cable connection at P4.
Ensure P15 and P16 are in the correct position for the application.
Ensure the speaker wiring configuration is correct.
Ensure the nominal page line level is correct.
Replace the speaker or driver.
Page/Party
®
operation does not
function.
Refer to the ADVANCE System Programming manual, Pub. 42004-700L2,
to ensure station address matches ADVANCE configuration.
Refer to “Setting the Address” on page 13.
Check cable connection at P4.
Check proper cable terminations between Termination and Main PCBAs.
Ensure proper termination on Page/Party
®
lines.
RTU output is not
functional.
Refer to the ADVANCE System Programming manual, Pub. 42004-700L2,
for station configuration.
For supervised output, ensure no monitored output faults exist.
Check fuse F1 on RTU PCBA.
Check the cable connection at P5 on the RTU and SmartSeries PCBA.
Check RTU terminal connections on TB6 and TB7. Refer to Figure 15 and
Figure 16.
Check operation of connected device.
RTU input does
not function.
Refer to the ADVANCE System Programming manual, Pub. 42004-700L2,
for station configuration.
For supervised input, ensure no monitored input faults exist.
Check the cable connection at P5 on the RTU and SmartSeries PCBA.
Check RTU terminal connections on TB6. Refer to Figure 17.
Check operation of connected device.
Vue de la page 29
1 2 ... 25 26 27 28 29 30 31 32 33 34

Commentaires sur ces manuels

Pas de commentaire